History

1983	Techno Print Co., Ltd. incorporated.
1984	Production of the prototype of the patterning of photolithography.
1986	Mass production of speedometer patterns commenced Mass production of film+film touch panels commenced Speed meter Film + film touch panel
1988	Current plant completed
1993	Mass commercial production of Cr patterning (black matrix for STN) commenced. Development of glass touch panel commenced. Cr patterning
1996	Mass production commenced of glass touch panels adopted as the first in the world genuine part for built-in car navigation systems
1997	Mass production of glass touch panels for video cameras commenced Mass production of ITO patterns for cellular telephones commenced
2000	Touch panel was adopted as a genuine part for built-in car navigation systems and full-scale commercial production commenced. Appointed as designated plant of Sainokuni (Saitama). Touch panel for car navigation systems
2001	Mass production of glass touch panels for gasoline stand pumps commenced. Mass production of Cr+ITO patterns for organic EL commenced.
2002	Mass production commenced of ITO patterns for aircraft intended for America. Mass production of Cr pattern glass caps for organic EL commenced.
2003	Certification of ISO9001 acquired
2004	Mass production of glass touch panels for aircraft commenced Patents relating to glass and glass touch panel granted in Taiwan and China
2005	Capital stock increased to 40 million yen (paid). Mass production commenced of touch panels for built-in car navigation systems intended for America.
2006	Mass production commenced of glass touch displays for personal computers. Patents relating to glass and glass touch panel granted in Japan and Korea. glass touch displays for personal computers
2007	Commercial production of double-sided ITO patterning commenced. Mass production commenced of Cr+ITO patterns for digital camera finders. Development of touchpanel for mobile terminals.
2009	Certification of ISO14001 acquired. Development of a large multi touch panel. Mass production commenced of touch panels for built-in car navigation systems intended for Europe.
2010	Acquired Sony Green Partner certification.
2012	Participating in medical equipment project. Micro channel production commences.
2013	Mass production of touch panels for GPS devices commenced. Acquired ISO/TS16949 certification.
2014	Prototype development of FTO pattern for use in solar batteries commences.
2015	Prototype development of LED heat sink processing commences
2016	Start electrochromic prototype production.(with NIMS) Start of trial production of microstructure.
2017	Low-load glass / glass touch panel that also supports pinch in / out and flick function.
2018	Acquired ISO 2015 certificate of ISO 9001/14001.
2019	Started trial production of micro LED mounting board
2020	Started trial production of metal mesh patterns
2021	Introducing bar coater
2022	Introduced shower etching equipment for Al, Cr, and Cu. A4 size metal sputtering equipment introduced Start of integrated production from film formation to patterning
2023	Started trial production of multilayer wiring boards for micro LEDs and OFETs. Issue of SDGs declaration